LED Strobe Light:
★Designed with Green LED strobe light which is light sensor. It will give an additional alert for the hearing impaired persons.
Wide Operating Range:
★The transmitter gives you up to 1000 feet of operating range in an open area, 500 feet in an enclosed area.
Customize Your Doorbell:
★The doorbell kit offers a total of 36 well-known melodies, you can have your favorite chime in 4 volume levels (Including MUTE mode) that you prefer.
Easy to Install:
★The wireless doorbell can be installed simply by just fixing the push button on the wall and install it with the attached double-sided adhesive tape and screws.
Wireless Range: 1000 ft
Receiver Power: AC 110V (US)
Transmitter Power: 1*12V 23A battery (included in package)
Strobe Light: Green light sensor
Device Quantity: 2 Chime units+1 Remote push button
Chime Sounds: 36
Volume: 3 Levels
Plug Type: US Plug
Dimensions of Remote Button: 3.1*1.8*0.8 inches
Dimensions of Chime Unit: 4.3*2.6*1 inches
Total Weight: 10.3 ounces
How to Install the Push Button:
1. Pry the back cover of the push button with a sharp screwdriver;
2. Install the 23A battery (included in package), press the button to inspect the power situation;
3. Stick on the double-sided tape on the back cover;
4. Screw the rear cover on the wall, press it for 5 seconds to make the tape stick tightly;
5. Close the rear cover with the main device.
What You Will Get:
2*Wireless doorbell chimes;
1*Remote push button;
1*Double sided sticker;
1*23A battery for remote push button;
Lifetime warranty and easy-to-reach support.
Green LED Strobe Light – The wireless doorbell kit is with green strobe light and light up automatically at night, give an alert for the hearing impaired persons.
1000 Ft Operation Range – German AKM transmitter, stable frequency & anti-interference features make the operation range up to 1000 Ft.
Sweet Crystal Melodies – Instead of annoying sound, the 2 receivers offer 36 clear custom chimes with 4 volume levels (The lowest is MUTE MODE), let you personalize preferred ambiance.
Easy To Install – No Battery Required for the Receiver. The push button is POWERED BY 1*A23 BATTERY (included in package), install it with the attached adhesive tape and screws.
Water-Resistant & Eco-Friendly – Varnish craft surface and water-resistant push button without any harmful chemicals, bright as new after long time use.
(as of Feb 26,2020 14:50:15 UTC – Details)